Jump to content

1/48 Hobby Boss A-10


Recommended Posts

Hi everyone,

Got home from work today to find the new Hobby Boss A-10 waiting ;) , fresh off the plane from Hong Kong. Thought I'd share some pics of whats in the box....

DSCN0588.jpg

Starting indoors with the instrument panel, nicely done, the dials have no detail although you do get a decal. Will be reaching for the Mike Grant gauges here.

DSCN0613.jpg

Tub

DSCN0617.jpg

Bang seat, particularly nice, only things missing are lap belts

DSCN0616.jpg

Nose gear

DSCN0611.jpg

Main gear, oleo looks a bit skinny

DSCN0610.jpg

Interior of nose well

DSCN0599.jpg

Nice chaff dispensers

DSCN0590.jpg

Link to post
Share on other sites

Fine surface detail, although no raised rivets on the rear half of the fuselage ;)

DSCN0594.jpg

Nose is a better shape than Italeri's

DSCN0598.jpg

Vertical stabs, monogram on the left for comparison, rivets are recessed here as well

DSCN0597.jpg

Airbrakes, designed to be closed, no horn balances included

DSCN0591.jpg

Which makes me wonder why they included the backing plates for the airbrake wells B)

DSCN0596.jpg

Fan blades, looks like they're all there but I haven't taken a head count yet :P

DSCN0606.jpg

Decent full exhausts

DSCN0608.jpg

Cowling with seperate panels

DSCN0607.jpg

Link to post
Share on other sites

Lots of explosives too

DSCN0604.jpg

DSCN0603.jpg

Rockeyes

DSCN0605.jpg

For the record you get

12x Mk82

12x Mk20

2x MER

1x Ferry tank

2x Aim-9L plus DRA

6x Mavericks

2x GBU-8!!

2x ALQ-119

2x ALQ-131 (allegedly)

Is this right? Not like the one in the hase RF-4 although I'm not really a weapons type guy,

DSCN0589.jpg

Rubber tyres

DSCN0619.jpg

Windscreen, never bought the Trumpeter kit so I'm not sure what was wrong with that but this looks close

DSCN0620.jpg

DSCN0622.jpg

Pylons

DSCN0595.jpg

Link to post
Share on other sites

Looks nice, though don't see why they give you a GBU-8! Some rocket pods would've been nice!

That ALQ-131 is the 'shallow' version, as opposed to the more commonly seen (at least on USAFE aircraft) 'deep' pod. Looks fairly accurate to me :bandhead2:

Link to post
Share on other sites

Decals, both from the ODS time period which I think will mean the removal of the laste mods...?

DSCN0628.jpg

DSCN0627.jpg

And finally, the wings and fuselage taped together

DSCN0626.jpg

DSCN0625.jpg

DSCN0624.jpg

Other highlights include seperate flaps, a full gun and barrel and a set of chocks. All in all it looks a pretty good deal, bring on the Hornets!!!!

:bandhead2:

Gary

Link to post
Share on other sites
Looks nice, though don't see why they give you a GBU-8! Some rocket pods would've been nice!

That ALQ-131 is the 'shallow' version, as opposed to the more commonly seen (at least on USAFE aircraft) 'deep' pod. Looks fairly accurate to me :bandhead2:

The GBU-8s made me look twice!! I don't think I've ever seen them outside of the hasegawa weapons set. I've never seen that version of the ALQ-131 before either, nice to have another option.

Link to post
Share on other sites

Bring on the Hornets and Rafales.

Wonder if I'll just do the Monogram for a pre-LASTE bird with the decals from this kit and use this as a current version.

Remind me, did the original Trump 32nd do a LASTE equipped version or not? I don't recall the GPS dome in back of the canopy that is shown on this one.

Now a question arises...since this one has the LASTE antennas on the kit did they have a non-LASTE version of the tails for the NAW A-10B kit? That was built long and more than likely sent out to the boneyard long before the LASTE was probably even thought of.

Matt

Edited by Matt Roberts
Link to post
Share on other sites

Looks good! Can we get them in the States? I want to order one through my LHS. My LHS is 90% R/C and their plastic is always 15% off. I'm going to hold off on the single-seaters (I've got 8 Monogram kits), but I will defitnely jump on the A-10B!

Chappie

Link to post
Share on other sites
Looks good! Can we get them in the States? I want to order one through my LHS. My LHS is 90% R/C and their plastic is always 15% off. I'm going to hold off on the single-seaters (I've got 8 Monogram kits), but I will defitnely jump on the A-10B!

Chappie

I don't think so. If you've followed the Hobbyboss saga over the past few months, for some reason Stevens Int'l is not importing the line here into the States. Great Models does have some of the 72nds and 48th armor available but exactly where and how they got thier stock is unknown. As it stands now it appears that going thru Lucky Models is the best bet. Including postage they are about $48 from them and from HLJ they are going for $65 without P&H.

BUt I cannot see if HB really follows thru with thier release schedule that someone else would not figure out some way to get thier stuff here into the States

Matt

Edited by Matt Roberts
Link to post
Share on other sites
I don't think so. If you've followed the Hobbyboss saga over the past few months, for some reason Stevens Int'l is not importing the line here into the States.

Just specualtion...Steven's is probably not the exclusive distributor here in the States. I spoke to my LHS about this a few months ago and they said that they will be carrying the HB line. Their major supplier is Sentai, so I'm guessing that Sentai might be the distributor here in the States?

At any rate, I couldn't wait so I placed an order at LM since they seem to have the best price and it should be here very soon! :yahoo:

:lol:

Link to post
Share on other sites
Remind me, did the original Trump 32nd do a LASTE equipped version or not? I don't recall the GPS dome in back of the canopy that is shown on this one.

Now a question arises...since this one has the LASTE antennas on the kit did they have a non-LASTE version of the tails for the NAW A-10B kit? That was built long and more than likely sent out to the boneyard long before the LASTE was probably even thought of.

Matt

The Trumpeter kit had some of the LASTE mods, not all. The same is true with the HB kit. But the HB kit has more of the modifications than the Trumpeter kit had. So be careful, you don't have all the LASTE mods.

Link to post
Share on other sites
Fine surface detail, although no raised rivets on the rear half of the fuselage ;)

Vertical stabs, monogram on the left for comparison, rivets are recessed here as well

Fan blades, looks like they're all there but I haven't taken a head count yet :P

That looks great, maybe you can do a cut and shut with the Italeri kit? - Front Hobby Boss, rear fuslarge, fins and rivet detail from the Italeri kit.

Edited by ShaunBD
Link to post
Share on other sites
I don't think so. If you've followed the Hobbyboss saga over the past few months, for some reason Stevens Int'l is not importing the line here into the States. Great Models does have some of the 72nds and 48th armor available but exactly where and how they got thier stock is unknown. As it stands now it appears that going thru Lucky Models is the best bet. Including postage they are about $48 from them and from HLJ they are going for $65 without P&H.

BUt I cannot see if HB really follows thru with thier release schedule that someone else would not figure out some way to get thier stuff here into the States

Matt

I have not been following the HB deal at all until I saw they were releasing the N/AW A-10. Hannants has HB armor, I wonder if they will get the Hogs?

Thanks for the info.

Chappie

Link to post
Share on other sites
Looks nice, though don't see why they give you a GBU-8! Some rocket pods would've been nice!

That ALQ-131 is the 'shallow' version, as opposed to the more commonly seen (at least on USAFE aircraft) 'deep' pod. Looks fairly accurate to me :)

FYI -

Here is the current ALQ-131 carried on DM Hogs - I shot this last week.

Granted this is a mega-blow-up from an EOR landing shot - but you get the idea of the shape. If there's another style pod out there, I haven't seen it locally. And yes . . . rocket pods would have been nice - Check out the rest of the load on this 354th FS Hawg.

Here's the photo:

IMG_5638B.jpg

Edited by RipVW
Link to post
Share on other sites
Just specualtion...Steven's is probably not the exclusive distributor here in the States. I spoke to my LHS about this a few months ago and they said that they will be carrying the HB line. Their major supplier is Sentai, so I'm guessing that Sentai might be the distributor here in the States?

Interesting. In that case, Hobby Boss wouldn't be a Trumpeter sub-division/sister company (as most people have been suggesting), since, well, why use a different distribution network? It'd be like selling Special Hobby through one distributor, Azur through another. Which would jibe with other comments that Trumpeter were 'unhappy' with Hobby Boss for pantographing down their T-34s, with an ensuing fall-out. Wouldn't be an issue if they're the same company.

So I guess it's a case of 'all those Chinese model companies look the same to me', when really, they're not.

Link to post
Share on other sites

If you go to the Hobby Boss website, and you look for international distributors, it has a star right in the middle of the US. If you try and pull up a list, it says they are still working on it. I have no doubt they'll get here, really, the US would be their largest market or second at the least. They want the $$, here it is...I gotta grab a few of these, they look way better than first impression, and that was pretty favorable..Still have 5 Monogram Hogs that will get built. With this out, I will not be buying the Italeri kit, looks like crapola compared to this thing.

Jeff

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...