Jump to content

Recommended Posts

:angry: Hello All,

I see the most beautifull models here and I'm wandering: How do you guy's painted the inside of the canopy's?I'm building 1/72 scale planes and I know it's a little teenie weenie.But...wath's the secret?Good masking tape,a steady hand?Reg. Sabre45 :angry::rolleyes:

Link to post
Share on other sites

I'm sure you'll get many responses as to the ways in which to paint canopies. Here is what I believe most of the folks here do.

1. mask your canopy using Tamiya tape and or liquid masks such as those made by humbrol or micromask, or you can use elmer's white glue, or you can use BMF (bare metal foil). This is the critical step to a good canopy, rushing this step turns out crap work. I would also recommend scalpel blades or a new no.11 blade for trimming your masking.

2. airbrush or spray can your interior color. Do not brushcoat this it will ruin the work, it will get under the mask, and will typically require multiple coats, this is bad news always airbrush or use a spray when painting canopies.

3. this is an optional step, but you can then put a second coat using black. The theory is that it simulates the seal around the windows of the canopy I usually don't do this.

4. Spray your final coat for open canopies. For closed canopies, attach it first to your model and spray your final coat along with the rest of the plane.

5. Do not remove your masking until you are done.. and I mean done done, like decals, weathering, flat coat gloss coat, whatever. Then take off your masking.

Link to post
Share on other sites

Sabre 45 - I do it just like urloony says. See pic of my masked P47 canopy below. By spraying the interior colour first (on the outside), you can see that colour thru the clear plastic (don't go near trying to actually paint the inside canopy frames, too hard).

Thommo

Link to post
Share on other sites

could not have said it better myself gents although one more step BEFORE removing the canopy masks

Gently run a fresh scalpel blade along the frame edge. This will ensure the paint does not lift as the mask is removed as it cuts through the paint layers on top of the tape. Especially important when using multiple light coats such as white.

:lol:

MikeJ

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...