Massimo Busolini

Here it is the finished work, I worked a bit to be able to adapt the pilots of PJ Productions. However, the work is not done here .... In fact, with the other companions of adventure, we are working on the mega board will be made ​​where a small aircraft flight line of 4-5 and two on the bypass taxiing. Soon to follow pictures of the board in the works!

Once the washing with tempering and after applying the decals say that these elements are nearing completion! Here you can appreciate the work done with the airbrush, dust and temper.

After managing to enter the cockpit inside the fuselage Aires, after a great job of thinning of the fuselage, I closed everything and plastered where necessary. After sanding properly, re-recorded and where the panels were gone, we are ready to start applying the camouflage the model. The colors are GUNZE, ie the 'H-311 for the lower part, the H-27 with an addition of two drops of red to produce the light brown, the H-309 for the darker green and the H -340 for the lighter green. Of course first of all apply the model to bring out the shading panels. And finally completed the ca

Hello Boys! Just because I do not have enough, I start with another 104 more precisely, a TF-104G of the Belgian Air Force. To be more precise, we are friends we are making 7 7 104 all Belgians, TF 2 and 5 single, to be reproducing the whiskers on a flight line! I am more taken back by all, but I am committed to finishing it in less than 2 months. Then the configuration that I want to make it like you see in the picture (http://www.sbap.be/archivalia/pictures/pics%20129.jpg) that is with a container instead of the SUU-21 tanks under the wing. I would like to present it in a taxi, so I've

As soon as I got this kit in his hands, and I saw the detail of the print, I had no doubts at buy it! The ICM, this time has made ​​a kit fabulous, the panels of the print have a negative fine, I would say perfect for 1 / 144 scale, perfect without snagging. The idea that I jumped on his head is to realize the landing concordsky and position, then raised with respect to the base support, but where the board is modified, so as to give a good effect "panning" right on texture! As you can see it starts with fixing the windows from the inside, but has reserved a small negative surprise ...

This scale model is a Hasegawa 1 / 48, where I went to add photoetched to the interior of Eduard, the wheels of the True Details resin, and exaust engine of the QuickBoost resin, and finally the tauro decals depicting a sample of 3 °Wing, based in Bari in 1952. The staining was done using color-Master Model Metalizer.

Due to a failure to digital, I could take some photos just finished model, and I joined in some shots with that of my friend Silvano. It 'the first time I use a pilot production of the PJ, but I must say that the final result is not all bad! you these figures recommend them!

The model that I started to build a Royal Navy Harrier GR Mk.9, scale 1 / 48 dell'Hasegawa. The box is dedicated dell'Hasegawa all'esemplaredel Naval Strike Wing (ZD406) 100th Anniversary of the FAA. The kit very good, I wanted to add the resin cockpit set in dell'Aires, resin and a pilot of PJ Productions, very nice and detailed. After eliminating the internal detail of the original cockpit kit, the set is perfectly suited Aires. The only downside on the assembly about the bottom inside of the vents, but will be resolved by applying the caps, representing the plane to the parkin

Here's to you the finished model!

I wanted to try to do a job challenging enough on its wheels in the end I liked it. I used the new sheet of decals Tauro dedicated to 104 .... and I must say that have nothing to do with the old Tauro decals, these are wonderful, in-register, accurate colors, thin at the right point, even dare I say perfect.

Now we are ready to run the washing tempering gouache. Of course, in order not to affect the underlying color washing will be done in phases farie, that is, before the wings, then the front of the fuselage ... etc.. Even before it is completely dry, the temper began to remove more, with a damp cloth. In the photo below you can see the right wing used in the wash, while the left one lacking them. Without this, the dust Tamiya, I give the model a little but not too much experienced. Finally two coats of glossy paint.

Meanwhile, the colors are dry, I colored wheels, always with the alluminium Metalizer, polished and after I did the washing with the temper.

Once you have filled and sanded, we are ready for the coloration. I apply the pre-shading. Finally, with the color Gunze H306 cleared with a drop of white, apply the paint, and also those of the cone forward. The undercarriage I've colored with alluminium Metalizer.

The change to do the eyelid of the front instrument panel. Then I wanted to put into practice the advice of a Silvano, for coloring the cabin: Consists in coloring everything with black, then spray the base color of the cabin with the airbrush in a vertical, from above, it manages to highlight the details in a much more realistic, and you end up with a slight drybrush white or light gray. This means that the washing temper would be unnecessary. Finally, the seats are in the final ...

Hello everyone! This is my first post and I hope you find it interesting. And here we are with another Starfighter, a TF, always of Hasegawa 1/48 scale, with the addition of the set AIRES for the interior, and since the color grey Model-Master produces it, so I should make a mixture of several colors, I feel for the first time the colors GUNZE, even the color, because it will only gray H306 I cleared with a drop of white. I must say that I have not been all bad, even If the rest of affections Model-Master! The specimen of 20 ° Gr I would like to make is the MM54254,